5. Guía de verificación y corrección de problemas

ADVERTENCIA

No abra o desarme el Inversor Prosine. Vea la sección 7, Servicio de Garantía, del manual sobre las instrucciones para obtener servicio para el Inversor Prosine. El intentar darle servicio usted mismo a la unidad, puede causar un riesgo de descarga eléctrica o incendio.

Esta sección describe los problemas y posibles soluciones para la instalación y configuración, incluyendo las condiciones de falla e indicadores.

5.1 Condiciones de falla e indicadores

Las siguientes condiciones de falla se muestran en la pantalla en el tablero de control junto con un sonido del alarma y un contraluz intermitente del LCD.

Indicación en el Tablero de

Control

Condiciones de falla

Solución

HIGH BATT SHUTDOWN

Voltaje de la batería muy alto

Revise si hay desperfectos en el sistema de cargado de la batería. Reactive manualmente el inversor appagando (#) y

 

 

encendiendo (I) nuevamente.

LOW BATT SHUTDOWN

Voltaje de la batería demasiado bajo

Cargue la batería. Reactive manualmente el inversor appagando (#) y encendiendo (I) nuevamente.

 

 

 

OVERLOAD SHUTDOWN

Corriente de la batería muy alta, probablement

Reduzca la carga en el invrsor.

 

hay una sobrecarga de CA

 

 

 

 

OVERTEMP SHUTDOWN

Recalentamiento en el sistema

Mejore la ventilación y el enfriamiento y/o reduzca lacarga en el inversor.

 

 

 

SYSTEM SHUTDOWN

Desperfecto en el sistema o sobrecarga

Asegure que todas las cargas estén desconectadas. Trate de reactivar la unidad apagando (#) y luego encendiendo (I) otra

PS_FAULT SHUTDOWN

 

vez. Si la unidad sigue sin funcionar, contacte a su distribuidor/Vendedor o a Xantrex si requiere de

DC-DC SHUTDOWN

 

servicio/Reparación/Reemplazo en garantía.

 

 

 

La siguiente tabla, muestra algunos consejos prácticos sobre como solucionar algunos problemas:

Problema y síntomas

Posible Cause

Solución

No hay votaje de salida y el tablero de control señala

Cierre por bajo boltaje de entrada.

Recargue la batería, revise las conexiones y cables.

10.0VCC o menos voltaje (20.4VCC en modelos de 24V)

 

 

 

 

 

No hay voltaje de salida, no hay indicación de voltaje

El inversor está en la posición (#).

Encienda el inversor (I).

 

La batería no carga al inversor.

Revise los cables hacia el inversor. Revise el fusible de la batería.

 

Conexión inversa de polaridades de CC, el fusible

Contacte a un técnico calificado para darle servicio al inversor y reemplace el fusible (el

 

interno está abierto.

fusible de reemplazo correcto está marcado en el interior de la unidad) OBSERVE QUE LA

 

 

POLARIDAD DE CC SEA LA CORRECTA.

 

 

 

No hay voltaje de salida y el tablero de control señala

Cierre por alto voltaje de entrada.

Asegúrese que el inversor esté conectado al voltaje correcto de la batería.

16.0VCC o más voltaje (32.0VCC en los modelos de 24V)

 

Revise las regulaciones del sistema de cargado.

 

 

 

 

 

Constante advertencia por batería baja, indicador de voltaje

Fallas en el cable de CC.

Use los cables apropiados y tenga conexiones sólidas.

menor que 11.0V (22.0VCC en modelos de 24V)

Batería en mal estado.

Cargue la batería o use una nueva batería.

 

 

 

 

12 Español

Manuel del Usuario del Inversor Prosine

Page 58
Image 58
Xantrex Technology 1800i, 1000i Guía de verificación y corrección de problemas, Condiciones de falla e indicadores

1800i, 1000, 1800, 1000i specifications

Xantrex Technology offers a range of power inverters that cater to both recreational and professional needs, with the Xantrex 1800 and 1000 models being among the most popular in their lineup. These inverters are specially designed to convert DC power from batteries into clean, pure sine wave AC power, making them suitable for running sensitive electronic devices and appliances.

The Xantrex 1800 is a robust inverter that delivers 1800 watts of continuous power and 3600 watts of peak power. This makes it ideal for powering essential appliances like refrigerators, microwaves, and power tools. Its compact design allows for easier installation in various settings such as RVs, boats, and off-grid homes.

On the other hand, the Xantrex 1000 inverter is designed for lower power requirements, offering 1000 watts of continuous power and 2000 watts of peak power. It is perfect for powering small appliances, electronics, and gadgets, making it a great choice for weekend campers and those who require less energy capacity.

Both models feature advanced technologies, including low idle power draw, which ensures that energy is conserved when the inverter is not actively powering devices. They also include overload protection, ensuring the inverter shuts down automatically if the power exceeds its limits, thus preventing damage to the unit or connected devices.

Another hallmark of Xantrex inverters is their user-friendly interface. The LED indicator lights provide clear status updates on the power output and inverter operation, making it easy for users to monitor performance at a glance. Additionally, both models feature various safety protocols, including short circuit and over-temperature protection, to enhance operational safety.

Installation is straightforward, thanks to the provided mounting options and wiring accessories. The units are designed to withstand harsh environments, with durable casings that enhance longevity and resilience.

In summary, the Xantrex 1800 and 1000 models offer reliable power solutions for a variety of applications. Their combination of high-quality sine wave output, advanced safety features, and user-friendly operation makes them a top choice for anyone seeking dependable off-grid power. With Xantrex, users can trust that they are investing in products engineered for performance and durability in an ever-increasing range of power needs.