Xantrex Technology HF 1000, HF 1800 Display Panel Operation, Feature Description, Inverter button

Display Panel Operation

The Freedom HF features a display panel with three-digit LED display to show inverter, AC source, and battery status information.

3

4

Utility
Battery	Select
Fault

1	2
	FREEDOM	See NOTE in Feature # 4 below.
Input Voltage (V)
Input Current (A)	HF 1000	Freedom HF 1000 shown
Output Power (kW)

Feature Description

1Inverter button

•Press and hold for one second to turn the Freedom HF’s Inverter function ON or OFF (when AC Shore Power is NOT present.)

•Press and hold for five seconds to go into Charger Current Select Mode.

2Three-digit LED display screen shows status information and fault codes.

3Status LED Indicates the mode of operation with a three-color LED.

•Green pertains to Utility status.

•Solid indicates the Freedom HF is in shore power mode and battery is fully charged.

•Flashing indicates the Freedom HF is in shore power mode and the unit is currently charging the battery.

•Yellow pertains to Battery status.

•Solid indicates the Freedom HF is in inverter mode and using the battery to provide AC power.

•Flashing indicates the Freedom HF is in inverter mode but AC shore power is detected thus transferring to shore power mode within 20 seconds.

•Red indicates a Fault condition and the Freedom HF has shut down. See “Troubleshooting Reference” on page 5–8.

4Select button

•In Inverter mode, press the button to choose what appears in the three-digit LED display: Input Voltage, Input Current, or Output Power. See “To adjust what is being displayed on the screen:” on page 3–3.

NOTE: A corresponding LED lights up for each of the three items.

•In an Alarm condition, press and hold for two seconds to disable (or enable) the audible alarm. See “To adjust the alarm setting:” on page 3–4.

•In Charger Current Select Mode, press to select the charger current. See “To adjust the charging current:” on page 3–4.

4–2 975-0390-01-01