Xantrex Technology HF 1800, HF 1000 manual Personal Precautions When Working With Batteries

Safety

Personal Precautions When Working With Batteries

WARNING: BATTERIES PRESENT RISK OF ELECTRICAL SHOCK,

BURN FROM HIGH SHORT-CIRCUIT CURRENT, FIRE OR

EXPLOSION FROM VENTED GASES. OBSERVE PROPER

PRECAUTIONS.

1.Study and follow all of the battery manufacturer's specific precautions, such as removing or not removing cell caps while charging, and recommended rates of charge.

2.Add distilled water in each cell until battery acid reaches the level specified by the battery manufacturer. This helps to purge excessive gas from cells. Do not overfill. For a battery without cell caps, carefully follow manufacturer's recharging instructions.

3.Make sure the area around the battery is well ventilated.

4.Never smoke or allow a spark or flame near the engine or batteries.

5.Use extra caution to reduce the risk or dropping a metal tool on the battery. It could spark or short circuit the battery or other electrical parts and could cause an explosion.

6.Remove all metal items, like rings, bracelets, and watches when working with batteries. Batteries can produce a short circuit current high enough to weld metal to skin, causing a severe burn.

7.Have someone within range of your voice or close enough to come to your aid when you work near a lead-acid battery.

8.Have plenty of fresh water and soap nearby in case battery acid contacts skin, clothing, or eyes.

9.Wear complete eye protection and clothing protection. Avoid touching your eyes while working near batteries.

975-0390-01-01 vii