Xantrex Technology IP1012 AL manual Charger features

Introduction

Charger features

•Low voltage shutdown

The inverter shuts off when your batteries reach a predetermined voltage set in the microprocessor to protect batteries from permanent damage. Low voltage shutdown also monitors frequency and voltage, and protects against overload, short circuits and over-temperature.

•Automatic shutdown after 8 hours for loads less than 15 ±5 watts

This feature prevents the inverter from draining the batteries if it is left on without a load.

The IP1012 AL offers the following charger features:

•3-stage charging with 50 amps maximum charging current for 12V battery type when shorepower is connected, to ensure your batteries are always charged

•Automatic transfer to invert mode

When the AC shorepower cord is disconnected, the unit automatically switches to invert mode. When AC shorepower is available again, the inverter automatically switches to charging/pass-through mode.

•Load management capability which temporarily reduces charging current to the batteries when a large AC load is applied to the inverter output. This capability helps reduce the chance of tripping the shorepower breaker.

1–4 975-0337-01-01