Operation

Battery Charging

Connection

When you are connected to shorepower, the Charge indicator is

cord

illuminated and the unit is both passing power through to the appliances

 

and charging the batteries. To avoid low voltage problems, make sure

 

your connection cord to shorepower is not too long or too light to support

 

the loads you are running. A 12 gauge or larger extension cord is

 

recommended.

AC voltage

If the Charge indicator flashes slowly (about twice per second), this

 

means the AC voltage is out of range and your batteries are not charging.

Using Shorepower

If you are running too many loads you may either trip the AC system breaker if one is installed, or the shorepower breaker. Reduce the load and reset the affected breaker.

The charger will automatically reduce battery charging if other AC loads are connected. This feature helps to prevent nuisance tripping of the shorepower breaker.

Miscellaneous Hints

Automatic

The inverter automatically turns off if it has not detected any AC loads for

shutdown

8 hours when AC load is less than 15W or the loads are so small the

 

inverter cannot detect them, such as an alarm clock or a small television

 

(less than 15W).

Output power

The total output of the inverter/charger is 1000 watts.

.

 

 

 

 

 

 

 

Note: The IP1012 AL does not provide any warning before it shuts

 

 

down. If you need to operate a critical AC load, be sure there are no

 

 

heavy loads connected and that the batteries have been recently

 

 

charged.

 

 

 

Connect delay

If you are connected to shorepower, the Charge indicator should be on

to AC power

and the Inverter indicator off. The Charge indicator may blink slowly

 

when you first apply shorepower because of a connect delay (about 30

 

seconds), but then will illuminate steadily.

Load failure

If any loads fail to operate, or the inverter shuts down, refer to Chapter 4,

 

“Troubleshooting” for suggestions.

2–12

975-0337-01-01

Page 25 Page 27
Page 26
Image 26
Xantrex Technology IP1012 AL manual Battery Charging, Using Shorepower, Miscellaneous Hints, Automatic
Page 25 Page 27

IP1012 AL specifications

The Xantrex Technology IP1012 AL is a high-performance inverter designed to meet the needs of mobile and off-grid applications. With its compact and lightweight design, the IP1012 AL is ideal for recreational vehicles, boats, and even remote cabins, providing a reliable source of power wherever it is needed. One of the standout features of this inverter is its ability to deliver a continuous output of 1000 watts, with a surge capacity of up to 2000 watts. This makes it capable of powering a range of devices, from laptops and televisions to small appliances and power tools.

The Xantrex IP1012 AL utilizes advanced sine wave technology, which produces a pure sine wave output that is essential for sensitive electronic equipment. This technology ensures that devices such as computers and medical equipment operate safely and efficiently, minimizing the risk of damage from power fluctuations. Additionally, the inverter is equipped with built-in safety features, including thermal shutdown protection, overload protection, and short circuit protection, ensuring that both the inverter and connected devices are safeguarded against potential electrical hazards.

Another key characteristic of the IP1012 AL is its user-friendly interface, featuring LED indicators that provide real-time information on the inverter's status and performance. The inverter also boasts a wide input voltage range, accommodating various battery types and configurations, making it versatile and adaptable for different applications. Its lightweight aluminum chassis further enhances its portability, making it a perfect choice for outdoor enthusiasts and those seeking a dependable power source for camping or hiking trips.

Furthermore, the Xantrex IP1012 AL is designed for efficiency, with a built-in energy-saving mode that reduces power consumption when the inverter is not in use. This feature prolongs battery life and maximizes the efficiency of the overall system. The inverter connects easily to battery banks, and its compact form factor allows for convenient installation in tight spaces.

In summary, the Xantrex Technology IP1012 AL is a powerful and reliable inverter that offers essential features for a variety of mobile and off-grid applications. Its advanced sine wave technology, safety features, user-friendly interface, and energy efficiency make it an excellent choice for anyone looking for dependable portable power. Whether you're a weekend warrior or a full-time RV traveler, the IP1012 AL ensures you have the energy you need when you need it.
Top Page Image Contents