Operating Features
Feature | Description |
| 1 | Positive terminal with terminal cap on |
|
|
| ||
|
|
|
|
| 2 | External DC fuse with fuse cover on | |
|
| ||
|
|
|
|
| 3 | Ambient Air Temperature sensor | |
|
| ||
|
|
|
|
| 4 | AC output connector | |
|
| ||
|
|
|
|
| 5 | AC input connector | |
|
| ||
|
|
|
|
| 6 | Inverter/charger control connector | |
|
| ||
|
|
|
|
| 7 | Negative terminal with terminal cap on | |
|
| ||
Location | Ignition protection for safe operation in applications that require ignition | ||
| protected equipment such as gasoline engine rooms or in a battery box. |
Ingress protected (IP66) for wet applications where the inverter will be cleaned with low pressure jets of water.
Operating Features
Inverter/charger
Inverter features
The inverter/charger functions as an inverter or as a charger depending upon the operational conditions. When the unit is inverting, it is said to be in invert mode and is referred to as an inverter. When the unit is charging, it is in charge mode and is referred to as a charger.
The unit can only operate in charge mode when external AC power referred to as “shorepower” is connected.
The IP1012 AL offers the following inverter features:
•Ability to run many of the same appliances that you use at home
You can operate TVs, VCRs, satellite receivers, computers, hair dryers, and small power tools for example. You can also run multiple loads up to 1000 watts in total.
•Surge capability
The IP1012 AL will manage loads up to 3000 watts for short periods of time as long as the peak current is less than 36 amps.