Mounting

Our Patent Pending "Ratchet Ring" makes mounting easy and fast.

TIP: When installing from the front of a panel or dashboard slide the Ratchet Ring onto cable with correct orientation

and then connnect the wires.

12345

12345

12345

12345

12345

12345

12345

12345

12345

CAUTION!

Orient ring so the ratchet teethwillengageproperly. Practice installing and removing ring before final assembly. Considerable force is required—this ensures the ring will not loosen over time.

 

Install the meter from the front of your

Push Ratchet Ring on

panel.Thepanelthicknessmayrangefrom

until firmly in contact

1/16" to 1 1/2". Slip the locking ring on

with panel.

from the rear and press forward until its

 

teeth hold the meter securely in place.

The gasket around the ring of the Link 10 should provide an adequate seal against moisture. If a sealant is used be sure it is silicone so that the Link 10 may be removed without damage.

10