Xantrex Technology LINK 10, Marine Instruments Problem, Suggestion

Troubleshooting

Problem	Suggestion
No lights or display	Check Power Connections
	Reset meter (page 28)
No keyboard response	Check Lock is not invoked
	Reset meter (page 28)
Time Remaining Not	Check Battery Capacity (page 21)
Accurate	Check Temperature Coefficient (page 32)
	Check Peukert Exponent (page 26)
Digital Display Dim	Clean front panel photo-sensor
	(Between A and Ah lights)
Current Polarity Reversed	Current Shunt leads reversed (page 13)
Intermittent Operation	Corrosion or loose wires. Loosen and
	reconnect all rear panel connections.
	Check voltage sense and shunt wiring
	at battery location.
Accumulates Negative	Charge Parameters not met. Check
Amp-hour reading	Charged Parameter values—has 100% of
	kWh been returned? Charging Current is
	not passing through shunt (pages 13, 22,
	23, and Function F04).

Xantrex Technology, Inc. warrants that the Link 10 will measure voltage, amperage, and amp hours within the published specifications. The Time Remaining and LED bar graph functions are complicated and require appropriate user setup and are therefore beyond the control of Xantrex and are not covered by warranty. Similarly, installation wiring and specific applications are beyond our control and are not covered by warranty. See page 52.

43