Xantrex Technology LINK 10, Marine Instruments DC+, DC- (system ground)

Wiring Overview

This drawing is for 12 V & 24 V systems.

For higher voltages see Prescaler use on page 44.

DC+

+

Fuses -

Shunt

Twisted pair cable See Detail page 13

DC- (system ground)

Terminal Strip

Connections

See Detail page 14

Mounting Page 10

Removing page 11

INSTALLATION TIP:

Use appropriate strain relief to avoid damage to the connector and terminal strip on the rear of the Link 10.

TIP: For a neat and professional looking installation use plenty of:

*Nylon wire wraps

*Wire wrap anchor points.

NOTE: To limit Voltage measurement error do not exceed wire lengths shown below. Error assumes 16 AWG wire and max. power consumption.

	0.5% Error	72 Feet Maximum
	1.0% Error	150 Feet Maximum
12	3.0% Error	450 Feet Maximum