Introduction

Congratulations! The Xantrex Link 10 is the most advanced (Patents Pending) DC power measurement instrument available. It shows you:

Battery State-of-Charge on a multicolor light bar. System voltage accurate to 1/20th of a volt (<20 VDC). System current accurate to 1/10th of an amp (<40 amps). Amp hours removed from, or put into, your battery.

Time of operation remaining until recharging is required.

For installation and operation questions, please contact Xantrex at 1-800- 670-0707 (toll free) or 1-604-422-2777 (direct). You can also email Xantrex at CustomerService@xantrex.com. For warranty and technical support please follow the process outlined on page 52.

If you wish the Link 10 to support an external Low Battery Alarm, such as a bell or buzzer, or if you need the Link 10 to report data to a computer or data logging unit, these options must be included at the time of manufacture and cannot be retrofitted in the field.

The installation of the Link 10 is simple, as is its operation. However, there are many advanced features and functions, so please take the time to read and thoroughly understand this manual.

Installer's Note: This manual contains operating instructions. Please leave it with the meter!

7