Introduction
975-0125-02-01 1–7
MS2000 Features

Front Panel Feat ures

Before you begin to operate the MS2000, review the front panel fea tures shown in
Figure 1-2 and described in Table 1-1. A detail ed v iew of the l ight s and butto ns on
the front panel is shown in Figure 1-3 and described in Table 1-2.
Figure 1-2
Front Panel of the MS2000
Table 1-1
Front Panel Features
Feature Description
1AC wiring compartment access panel provides access to the te rmi nal block for
wiring the AC input and AC output.
2AC knockouts provide access for AC input and AC output wiring. A total of four
knockouts are provided on the unit: two on the front and one on each side (not
shown).
3Mounting flanges are used for mounting the unit. A total of six flanges are
provided on the unit.
4Fans are located on the top of the unit and the bottom of the unit.
•Top external fan is an intake fan that activates when the internal temperature of
the inverter/charg er increases. The fan speed varies with the internal tempera ture
and turns off when the inverter/charger cools down. (This internal temperature
may be caused by heat in the inverter/charger or by high ambient temperature.)
•Bottom internal fan (not shown) is an exhaust fan and runs continuously if the
unit is inverting or charging.
2
3
2
1
2
4
2
3