Troubleshooting
975-0125-02-01 4–9
Fault Messages
When the MS2000 detects a fault condition, the fault is displayed on the System
Control Panel and also is indicated by the illuminated red Fault light on the
MS2000 front panel. A fault affects the operation of the unit. See “Fault Types”
on page 4–2 for an explanation of the different fault types.
You can view the 20 most recent fault messages of the MS2000 by selecting Fault
Log from the Device Info menu in the MS2000 Advanced Menu.
If several faults occur before you can acknowledge or clear them, they are
displayed together on a warning list. This list contains messages from every
Xanbus-enabled device, not just the MS2000. You can select a message and view
its details from the fault list.
To view a message from a fault list:
1. On the list, use the up arrow or down arrow button to highlight the message
you want to view.
2. Press Enter.
The complete message appears.
After viewing the message, you can return to the fault list by pressing Exit or
continue to the menu for the device that caused the fault by pressing Enter. Each
time you return to the list after viewing a complete message, the viewed message
is removed from the list.
If you have left the fault list, you can view them at any time from the System
Settings menu.
To view a fault list:
1. On the Select Device menu, highlight System and press Enter.
2. On the System Settings menu, highlight View Fault List.
3. Press Enter.