Xantrex Technology SW Series INFORMATION FILE BATTERY 19 MENU HEADING, Page 55, Menu System

MENU SYSTEM

In either mode, the SET START BULK TIME menu item setting under the BULK CHARGE TRIGGER TIMER (15) menu heading can be used to increase the battery charging regulation voltage to the BULK VOLTS DC setting.

Note: By setting the beginning time equal to the ending time, the grid usage timer feature is defeated.

INFORMATION DISPLAY

The following information is displayed as additional Menu Items.

After Start Charge time: SELL mode charges battery. FLT mode charges battery.

After End Charge time: SELL mode sells battery to AC1. FLT mode drops AC1 and inverts. Timer on when start <> end. Timer off when start = end;

Sell and float modes use timer. SLT and LBX mode ignore timer.

INFORMATION FILE BATTERY (19) MENU HEADING

This Menu Heading provides additional information about the battery charging system. It has no user adjustable settings.

INFORMATION DISPLAY

The following information is displayed as Menu Items.

Batt temp comp changes battery voltage reading away from actual. HBCO resets at: 6v/48, 3v/24 and 1.5v12 under HBCO.

LowBatt Transfer used in LBX, FLT modes only. Goes back to battery at LowBattCutIn (aka LBCI).

For LBX mode set below LBCI so charger won’t cycle batteries up and down set LBCO below.

 2001 Xantrex Technology, Inc.	Telephone: 360/435-8826	SW Series Inverter/Charger
5916 - 195th Street N. E.	Fax: 360/435-2229	Part No. 2031-5
Arlington, WA 98223	www.traceengineering.com	Rev. C: February 2001

Page

55