Xantrex AC to DC Converter
Explosive Gas Precautions
WARNING: Explosion hazard
1.Working in the vicinity of batteries may be dangerous. Batteries generate explosive gases during normal operation, therefore, you must read this guide and follow the instructions exactly before installing or using your XADC.
2.This equipment contains components which tend to produce arcs or sparks. To prevent fire or explosion, do not install the XADC in compartments containing batteries or flammable materials, or in locations that require
Precautions When Working With Batteries
WARNING: Explosion or fire hazard
3.Make sure the area around the battery is well ventilated.
4.Never smoke or allow a spark or flame near the engine or batteries.
5.Use caution to reduce the risk or dropping a metal tool on the battery. It could spark or short circuit the battery or other electrical parts and could cause an explosion.
6.Remove all metal items, like rings, bracelets, and watches when working with
7.Have someone within range of your voice or close enough to come to your aid when you work near a
8.Have plenty of fresh water and soap nearby in case battery acid contacts skin, clothing, or eyes.
9.Wear complete eye protection and clothing protection. Avoid touching your eyes while working near batteries.
10.If battery acid contacts skin or clothing, wash immediately with soap and water. If acid enters your eye, immediately flood it with running cold water for at least twenty minutes and get medical attention immediately.
11.If you need to remove a battery, always remove the ground terminal from the battery first. Make sure all accessories are off so you don’t cause a spark.
4 |
