Installation Instructions
•XADC converter faceplate and mounting hardware
•Plastic bag containing two mounting tabs and related hardware, one top mounting flange and related hardware
Choosing a Location
The XADC and AC/DC Distribution Panel must only be installed in a location that is:
Dry | Do not allow water or other liquids to drop or splash on the XADC. |
Cool | While the unit will safely operate at ambient air temperatures between 14 ºF and 86 ºF |
| |
| — the cooler the better within this range. At ambients in excess of 140ºF (60ºC) the |
| XADC may shut down. |
Ventilated | Allow at least 18 inches (45.7 cm) of clearance at the front of the XADC for air flow. |
| Ensure that the ventilation openings are not obstructed. |
Safe | Do not install the XADC or panel in the same compartment as batteries or in any |
| compartment capable of storing flammable liquids like gasoline. |
Protected from | Do not mount the XADC or panel where it will be exposed to gases produced by batteries. |
battery gases | Battery gases are corrosive, and prolonged exposure to battery gases will damage them. |
The XADC may be mounted in 3 orientations:
•horizontally on a flat surface
•vertically on a wall with fan vent facing left
•vertically on a wall with fan vent facing right
Wall Mount (Fan Up or Down) | Ceiling Mount |
Approved Mounting Orientation
Desktop Mount
Approved Mounting Orientation
Wall Mount (Fan Left or Right)
Figure 6 Installation Configurations
11 |
