Xerox 272 manual To Set Configure Before Scan

Scanning

Configure Before Scan

Choosing Configure Before Scan simply opens a scanning interface when you press or click a scan button. You can then use the interface to change the Resolution, Scan Mode, and other settings. When you scan, the scanned image will still be sent as the file type and to the same Destination Application already selected in the OneTouch Properties window for that button.

To Set Configure Before Scan:

1.Open the One Touch Properties window.

2.Using the arrows, choose the button that you want to set to configure before scanning.

3.Select the scan configuration Configure Before Scan.

Click the arrows to select the button.

Select Configure

Before Scan.

Right-click on Configure Before Scan to get the menu, and choose the interface to use for configuring.

4.Right-click on Configure Before Scan and choose an interface to use for configuring before scanning.

TWAIN—The TWAIN Interface opens for you to make changes prior to scanning. See “Accessing the TWAIN Interface from PaperPort” on page 82.

WIA—The Windows Image Acquisition Interface (WIA) opens for you to make changes prior to scanning (available for Windows XP or Windows Vista only). See “Scanning with the WIA Interface” on page 98.

5.Click OK or Apply on the One Touch Properties window.

DocuMate 272 Scanner User’s Guide 63