FUNCTION SELECTION VIA LINE (FSL) COMMANDS
<table
number> Number that identifies the translate table in
ranges 1 to 8.
1 Codepage 500 to Roman 8.
2 Codepage 500 to PC 8.
3 Codepage 500 to ECMA.
4 Codepage 259 to PC 8 (Box characters for
drawing only).
5 Codepage 500 to ASCII 7 Bit.
6 Codepage 500 to OCR A (Equivalent to PCL
translate table 1)
7 Codepage 500 to OCR B (Equivalent to PCL
translate table 1)
8 Codepage 500 to PC 850.
Y74—Define Symbol Set String@Y74,<string no.>,<HEXdata>@
Selects symbol sets in the printer in association with function
Y75, Overwrite Translate Table.
<user-
defined> Setup for symbol set select string on the form:
<string no.>, <HEXdata>
Number that identifies the symbol set string in
ranges 1 to 8.
Remember Zero (0) does not change symbol set.
Example @Y74, 01, 1B283855@ defines symbol set 00 to be Roman 8 on
a Hewlett-Packard PCL Level 4 printer.
Y75—Overwrite Translate Table@Y75, n1, n2, <data> {:n1,n2, <data>}@
Matches the printers character table. Changes are made in the
currently selected translate table.
Modifies entries in the active customized translate table. The
modifications become active immediately and are stored directly
in nonvolatile memory (NVM). Up to eight characters may be
defined for each code point.
n1Position of the character to be translated with
valid values of X'00'—X'BF'
n2Selected Symbol Set with valid values of 1—8
<data> Data is the hexadecimal value required to print
the character.
You need to select the translate table first before you can use
this FSL Y75 command. Therefore, use FSL Y73 or FSL Y91
before you use this FSL function Y75.
XEROX MRP FAMILY COAX COMMAND REFERENCE 3-53