Xerox 4230/MRP, 4220/MRP, 4219/MRP manual Y33ÐNon-SCS, Automatic Function at End of Job, @Y33, n@

FUNCTION SELECTION VIA LINE (FSL) COMMANDS

Y33ÐNon-SCS, Automatic Function at End of Job

@Y33, n@

Implements an IBM RPQ and takes effect as soon as the command is received. This function determines the print position after the print buffer is completed or after an end of message is received. Settings different from the factory default is NOT recommended.

n	Values for n are:
	0*	A New Line (NL) is automatically
		executed when the printing of a buffer is
		completed unless the last command
		executed was a Form Feed (FF), New Line
		(NL), or a Carriage Return (CR).
	1	A Form Feed is automatically executed
		when the printing of a buffer is
		completed, unless the last command
		executed was a FF.

	If n = 0, (default) is selected, on completion of the print buffer,
	an Automatic New Line is performed unless the last command
	executed was a Form Feed, or the last print position is at
	position 1. If Form Feed is the last character in the buffer, the
	end of printer buffer options (Y31) is checked.
	If n = 1 is selected, on completion of the print buffer, an
	Automatic Form Feed is performed unless Form Feed was the last
	command in the buffer. The printer is set at print position 1 of
	the first line of the next page.
	This option only affects NON SCS printing, and corresponds with
	the IBM 3268 RPQ SC9507, and the IBM 3287 RPQ SC3740.
Example	@Y33, 1@ sets the printer to automatically issue a FF at the end of
	a print buffer.

Same print line Next print line Next print line

Print position 1 2 3

o

OFF

MPP+1

End of Buffer

Present form

Last print line

ON

Page boundary

Next form

3-34 XEROX MRP FAMILY COAX COMMAND REFERENCE