CONFIGURATION AND SYSGEN SAMPLES
Configuration 4 shows a 4230/MRP attached to a previously
unused port, a 4219/MRP attached to a previously unused port
through a communications module, and the IBM 3287 attached
to its previous port. See Figure 6-4.
Figure 6-4. Configuration 4
Host
3287
3268
4219/MRP
4230/MRP
3287
3174
37X5
Transmission
Control Units
Sysgen samples
The sample sysgens in this section represent parameters to enter
when using IBM copyright programs to perform the following:
•Sample IO Gen for the 3274—non-SNA controller
•Sample VTAM parameter for local non-SNA 3270 terminal and
printer
•Sample VTAM parameter for local SNA 3270 terminal and
printer
•Sample NCP Gen—Group, Line, Physical Unit (PU), and
Logical Unit (LU) Definitions—3274-61C
•Sample NCP Gen—Group, Line, PU, and LU Definitions—
3276C
•JES/328X Print Facility parameters
•Sample mode table entries for 3278-2 terminals (by control
unit type).
•Sample mode table entries for 3278 printers (all control
units).
XEROX MRP FAMILY COAX COMMAND REFERENCE 6-3