Xerox 4220/MRP, 4230/MRP manual Y30ÐNon-SCS, Valid FF Followed by Data, @Y30, n@, On the next form

FUNCTION SELECTION VIA LINE (FSL) COMMANDS

Y30ÐNon-SCS, Valid FF Followed by Data

@Y30, n@

Implements an IBM RPQ and takes effect as soon as the command is received. This function determines the first print position after the Form Feed (FF) command has been executed.

n	Values for n are:
	0*	Next print position is the 2nd Print
		Position (PP) on the next form, when a
		valid FF, which is not positioned at the
		end of the IBM print buffer, is received.
	1*	Next character position is the 1st Print
		Position on the next form, when a valid
		FF, which is not positioned at the end of
		the IBM print buffer, is received.

The default is product dependent. PCL platform has a default of

1.If n = 0 is selected, the printer is set to print at position 2 of the first print line of the next page. If n = 1 is selected, the printer is set to print at position 1 of the first print line of the next page.

This option only affects DSC LU3 mode, a NON SCS printing, and corresponds with the IBM 3268 RPQ SC9503 and the IBM 3287 RPQ N/A.

Example	@Y30, 1@ sets the printer to advance to 1st Print Position (PP)
	on the next form.

Print position 1 2 3

Same print line

Next print line

Next print line

MPP+1

oForm feed here

Present form

Last print line

ON OFF

Page boundary

Next form

XEROX MRP FAMILY COAX COMMAND REFERENCE 3-31