FUNCTION SELECTION VIA LINE (FSL) COMMANDS
•You must insert the checkdigit for this code as it is not
uniquely specified.
•Start, stop, and center codes are generated automatically.
3 of 9 (X9) •Have alphanumeric characters, automatic checking, and
variable length with no checkdigits.
•You may insert the start and stop codes, but if you choose
not to do the insertion of the start and stop codes, these
codes are generated automatically. Both the start code and
the stop code are represented by an asterisk (*).
Example @Y59, 1, 29, 9, 2@ @W1, LaserJet@
This example defines bar code 1 to be a 3 of 9 bar code,
numeric, and alphanumeric characters with text printed under the
bar code, followed by the W command that sends data to the
printer.
The bar code height is 9 lines in 9 lpi = 1"
Expansion is set to 2.
Y60—Font Link for GFIDs@Y60, n1, n2@
Assigns a font, specified by its Global Font Identifier (GFID), to
the pitch value selection in Function Y3—Set Default CPI, or from
the system.
n1
n2Values for n1 = Pitch, and n2 = GFID are:
n1 = Pitch n2 = GFID
0 CPI Nothing is defined.
5 CPI 244
10 CPI 11
12 CPI 80
15 CPI 223
17.1 (16.1)
CPI 253
PROPORTIONAL 1412
13.3 CPI 204
20 CPI 281
27 CPI 290
If the pitch is also defined in function Y62—Setup for IBM-
defined Strings, then function Y3 refers to the value in function
Y62 and ignores function Y60. The link between the pitch and
GFID exists as soon as function Y60 is received.
Default is dependent on the type of printer.
Refer to the GFID Table 3-3 for the equivalent Pitch.
XEROX MRP FAMILY COAX COMMAND REFERENCE 3-45