Xerox 4590, 4110 manual Disconnect device

1. Before Using the Machine

•Do not place the machine where people may step or trip on the power cord. Do not place objects on the power cord.

•Do not override or disable electrical or mechanical interlocks.

•Do not obstruct the ventilation openings. These openings prevent overheating of the machine.

WARNING: Never push objects of any kind into slots or openings on this equipment. Making a contact with a voltage point or shorting out a part may result in fire or electrical shock.

If any of the following conditions occur, immediately switch off the power to the machine and disconnect the power cord from the electrical outlet. Call an authorized Xerox service representative to correct the problem.

•The machine emits unusual noises or odors.

•The power cord is damaged or frayed.

•A wall panel circuit breaker, fuse, or other safety device is tripped.

•Liquid is spilled into the press.

•The machine is exposed to water.

•Any part of the machine is damaged.

Disconnect device

The power cable is the disconnect device for this equipment and is attached to the back of the machine as a plug-in device. To remove all electrical power from the machine, disconnect the power cable from the electrical outlet.

WARNING: This product must be connected to a protective earth circuit.

1-4 Xerox 4110/4590 Getting Started