Selecting stock for your Xerox Nuvera System
Figure 1-3. Hangs lower with grain
Cut quality
The accuracy of the sheet cutting process affects paper handling and image quality.
When paper is cut with a dull blade, edges stick together to form “edge welds,” which cause paper jams and excess paper dust in the printer. Paper dust is also created when folio sheets are cut from the roll. A good paper mill takes steps to remove dust from paper before wrapping it.
Loose fibers on the edges of cut sheets can lead to printer contamination and visible fibers within printed images.
If the cut is not exactly square, skewing, jams, and stacking problems can occur. Image quality defects also occur due to misregistration in the paper path.
Slight variations in sheet cut size can also cause sheet to sheet registration problems in bindery operations.
In-house trimming and paper cutting
Xerox recommends the use of
KEY POINT: If you must cut sheets before printing, an
If a custom cut is required, it is recommended that you use a rotary slitter.
Xerox recommends trimming sheets after printing has been finalized to prevent the generation of paper dust and printer
Xerox Nuvera Paper Guide |