![Xerox DocuCard](/images/new-backgrounds/110203/11020397x1.webp)
Tips by stock type
Xerox DocuCard
| Table | ||
|
|
|
|
Description | A Xerox DocuCard is a sheet of paper with an embossed well and a | ||
| removable ID card that is attached with adhesive inside of the well. With the | ||
| DocuCard Enablement Kit installed, 8.5 x 11 inch, A4, 11 x 17 inch, and A3 | ||
| size DocuCards can be printed on the iGen3. The ID card dimensions are | ||
| 2.125 x 3.375 inches (53.975 x 85.725 millimeters). | ||
|
|
|
|
Selection tips | Use the standard DocuCards, which are 8.5 x 11 inch (A4) sheets with a | ||
| single ID card, as shown here. | ||
|
|
|
|
|
|
|
|
|
|
|
|
Storage tips | Due to their structure, DocuCards are packaged by alternating the stacking | ||
| direction every 50 sheets. Cardboard separators are placed between the 50 | ||
| sheet sets. | ||
| • Store DocuCards in unopened boxes until ready to print. | ||
| • Place unused DocuCards back into the original packaging, alternating the | ||
| direction approximately every 50 sheets. | ||
| • Do not leave DocuCard stock in the feeder tray overnight. | ||
|
|
|
|
Usage tips | • Load DocuCards with the ID card facing up. | ||
| • Load no more than 50 sheets of DocuCards in the feeder tray. | ||
| • If using a Tiltatron, you can load 200 sheets in trays 1 and 2 | ||
|
|
|
|
Xerox Nuvera Paper Guide |