Managing the Finishing Transport Module and Stacker
D.Managing the Finishing Transport Module and Stacker
Finisher procedures
Open the Finishing tab and/or Stacking Tab in Printer Manager to view a list of finishers and information about them, including whether the finisher is enabled or disabled and how each finisher is programmed.
Stacker Limitations
The DS5000 Stacker can stack up to 5000 sheets of
The Finishing Transport Module (FTM) transports the sheets from the print engine to the stacker and is able to reregister and rotate sheets. The FTM also has a Top Tray that can be used as a valid destination and purge tray.
The minimum size sheet that the stacker can accept is 7 inches (178 mm) in the process direction and 10 inches (254 mm) in the
Unload stacker cart
To remove the stack from the stacker cart or top tray:
1.If an Unload condition exists, go to step 5.
To manually initiate an unload condition for a specified stacker cart or top tray, go to step 2.
2.Open the Stacking Tab.
3.Select the stacker to be unloaded. The row is highlighted.
4.Press the right mouse button and select [Unload].
5.To unload a stacker cart, open the stacker front door.
6.Pull the cart from the stacker.
7.Remove the stack from the cart (or use the alternate cart).
8.Push the cart into the stacker.
Xerox Nuvera Paper Guide |