Manuals / Xerox / Computer Equipment / Copier

Xerox 701P28020 manual Define stocks, program, and load feeder trays, Printing on tabbed stock

Models: 701P28020

1 80

Download 80 pages 13.27 Kb

Page 59

Define stocks, program, and load feeder trays

Printing with tabs

Define stocks, program, and load feeder trays

1.At the system interface, add the tab stock to the Stock Library.

Check the tab stock packaging for required information. Use the following values for these stock attributes:

•Stock type = Pre-cut tabs

•Sequence = the number of tabs in a bank

•For the A4/11" Tab Guide:

•Width = 9 inches (short A4 tab dimension)

•Height = 11 inches (long A4 tab dimension)

•For the A5/5.5" Tab Guide:

•Width = 6 inches (short A5 tab dimension)

•Height = 8.5 inches (long A5 tab dimension)

2.Assign the tab stock to a feeder tray.

NOTE: Load forward collated tab stock when printing 1-sided tabs with a FTM/DS5000 or BFM type finisher. Load reverse collated tabs when printing with a Multi-Function Finisher.

3.Load the tab stock as shown on the label in the tray.

•Load with tabs trailing, face up.

•Ensure that standard, uncoated tab stock is loaded a minimum of 1/2 inch (12.7 mm) below the MAX line.

•Approximately 100 laminated or coated tabs may be loaded at a time.-

4.Adjust the paper tray guides and adjust any tabs that are misaligned.

5.Open the Feed Module front door and remove the tab guide (A4/11 or A5/5.5).

6.Install the tab guide making sure it is positioned below the actuator arm of the paper guide.

7.Assign the 8.5 x 11 inch (A4) or 8.5 x 5.5 inch (A5) stock for the body sheets to another paper tray and load the stock.

Refer to the User Guide and Training Aid for more detailed information.

Printing on tabbed stock

Programming a job with tabs incorporates many features and functions of the Xerox Nuvera. Refer to the User Guide and Training Aid for more detailed instructions, as required.

Jobs with tabbed stock must be set up according to the system’s finishing equipment. Refer to the following sets of hints and tips when printing jobs with tabbed stock.

Xerox Nuvera Paper Guide

B-3

Image 59

Xerox 701P28020 manual Define stocks, program, and load feeder trays, Printing on tabbed stock

Contents

701P28020 PaperGuide Paper GuidePrinted in the United States of America Xerox Corporation Global Knowledge & Language Services800 Phillips Road Bldg. 845-17S Webster, NY Copyright 2006 Xerox Corporation. All rights reservedManaging your paper supply Table of ContentsIntroduction Selecting stock for your Xerox Nuvera SystemAbout Xerox papers Tips by stock typeConverting paper weight from pounds to gsm Xerox Nuvera Paper Guide Table of ContentsAbout this guide ContentsIntroduction Typographical Conventions Xerox Nuvera User Guide and Training Aid CD or http// ww.xerox.com Related resourcesXerox Nuvera Getting Started Guide online Xerox Nuvera Paper Guide Introductionviii Table 1-1. Paper size range Stock size and weight ranges1. Selecting stock for your Xerox Nuvera System Table 1-2. Paper weight rangeTable 1-3. Image quality performance categories Recommended stocksThe Stock Library and Media Compatibility Guide Table 1-4. Stocks that should not be run on a Xerox Nuvera System Stocks that should not be usedPaper properties that affect xerographic images Ordering guidelines for paperFinish / Smoothness BrightnessTable 1-5. Stock Library coating categories Stock coating categories for Xerox NuveraFormation ImpuritiesElectrical properties and image quality OpacityShade Grain Moisture contentPaper properties that affect paper handling Figure 1-2. Tear with and against grain Determining grain directionTable 1-6. Paper weight ranges Figure 1-1. Fold with and against grainFigure 1-3. Hangs lower with grain Cut qualityIn-house trimming and paper cutting Electrical properties and paper handling Surface strengthXerox Nuvera Paper Guide Selecting stock for your Xerox Nuvera System1-12 Checking paper for defects 2. Managing your paper supplyTable 2-1. Stacking limits Handling paperControlling moisture in paper Problems caused by moisturePaper and moisture Figure 2-1. Wavy and tight edges Using storage bags for unused paperTable 2-2. Environmental limits Weekend shutdownTable 2-3. Paper conditioning times Conditioning paper to the printing environmentLoading paper into feeder trays Figure 2-3. Stock Loading Label for Trays 3 and Figure 2-2. Stock Loading Label for Trays 1 andFigure 2-4. Determining paper curl Figure 2-5. Fanning the lead edge Stock orientation Inserter hints and tipsStock names Regular stocks feed well from inserter trays Paper handlingXerox has tested a wide variety of stocks for use with an inserter Xerox Nuvera Paper Guide Managing your paper supply2-12 Stock types 3. Tips by stock typeXerox Nuvera MX Special considerations Drilled paper Envelopes Heavyweight coated 140 to 216 gsm Table 3-2. Bond 56 to 158 gsm Tips that apply to all stocksBond 56 to 158 gsm Table 3-1. All stocksTable 3-3. Bristol 147 to 220 gsm Bristol 147 to 220 gsmCarbonless Cover coated 140 to 220 gsmTable 3-7. Drilled paper Cover uncoated 106 to 220 gsmDrilled paper Table 3-6. Cover uncoated 106 to 220 gsmTable 3-8. Envelopes Heavyweight coated 140 to 220 gsmEnvelopes Table 3-9. Heavyweight coated 140 to 220 gsmTable 3-11. Index 130 to 220 gsm Heavyweight uncoated 106 to 220 gsmIndex 130 to 220 gsm Table 3-10. Heavyweight uncoated 106 to 220 gsmTable 3-12. Labels Lightweight uncoated 56 to 84 gsmLabel stock Table 3-13. Lightweight uncoated 56 to 84 gsmTable 3-15. Perforated paper Middleweight uncoated 91 to 105 gsmPerforated paper Table 3-14. Middleweight uncoated 91 to 105 gsmPaper handling problems may occur with conductive inks Preprinted paperminimize offsetting. UV-cured inks are recommended, especially on Avoid cold set inks to prevent excessive offsettingTable 3-17. Recycled paper Recycled paperTable 3-16. Preprinted paper Table 3-19. Synthetic papers and plastics Scored paperSynthetic papers and plastics Table 3-18. Scored paperTable 3-20. Tabs TabsTable 3-21. Transparencies TransparenciesTable 3-22. Xerox DocuCard Xerox DocuCardXerox Nuvera Paper Guide Tips by stock type3-16 Xerox digital stocks Accessing paper information online4. About Xerox papers United States To order Xerox paper in the United States, call To order Xerox paperFor technical information about Xerox paper Canada To order Xerox paper in Canada, callTable A-1. Basic sizes A. Converting paper weight from pounds to gsmUnderstanding basic size and basis weight Table A-2. Multipliers for converting pounds to gsm Formula for converting paper weightsTable for converting paper weights Table A-1. Basic sizesTable A-3. Equivalent basis weights of paper Table A-3. Equivalent basis weights of paper Obtaining additional tabs guide kits B. Printing with tabsTab Optimization Mode Installing the tabs guideSequence = the number of tabs in a bank Define stocks, program, and load feeder traysPrinting on tabbed stock Use only forward collated tabs For systems with a Multi-Function Finisher MFFFor systems with FTM / DS5000 or BFM type finishers Use only reverse collated tabsCopy stock attributes from one tray to another Feeder proceduresC. Managing the feed modules Add stock to a tray directly from the Stock Library windowLoad tab stock in a paper tray Load non-tab stock in a paper tray3. Select Tray Disable Tray Inserter proceduresView a list of paper trays and their settings Prevent a tray from feedingXerox Nuvera Paper Guide Managing the feed modulesUnload stacker cart Finisher proceduresD. Managing the Finishing Transport Module and Stacker Stacker Limitations9. Firmly close the stacker door View stacker settingsDelete a stock E. Managing the Stock LibraryDefine a new stock Edit stock attributes Definition Glossary of paper termsGlossary Term Definition Glossary TermDefinition Glossary TermDefinition Glossary TermDefinition Glossary TermDefinition Glossary TermIndex Page Xerox paper stock Xerox stocks Technical information Weight, paper Converting pounds to gsm A-1Warning, defined Xerox Nuvera Paper Guide IndexIndex-4