Xerox 701P28020 manual Tips that apply to all stocks, Bond 56 to 158 gsm, 1. All stocks

Tips by stock type

Tips that apply to all stocks

	Table 3-1. All stocks
Selection tips	• Before ordering stock, check the latest Xerox Nuvera Media
	Compatibility Guide.
	• If you wish to run a paper that has not been recommended by Xerox,
	test a small quantity before making a large purchase.
Storage tips	Refer to the Chapter 2, Managing your paper supply, section on controlling
	moisture in paper.
Usage tips	• To prevent leaving handling dents on sheets, handle stocks gently when
	loading feeder trays.
	• To prevent damaging large size papers, handle partial reams only.
	• Stock that is cut unevenly may require fanning to improve performance.
	• If multifeeds occur, leave the stock in the tray and fan the lead and trail
	edges of the stack.
	– Gently hold one side (lead or trail) of the stack to keep it from
	moving.
	– Gently lift the top four inches (10 centimeters) of the opposite side of
	the stack, then allow the sheets to gently fan back down into the tray.
	• If the paper packaging does not indicate a paper loading direction, load
	paper with the curl side down.
	• If jammed sheets exhibit damaged or folded lead edges, check the
	unloaded (stored) paper from the same shipment to see if the paper is
	defective.

Bond (56 to 158 gsm)

	Table 3-2. Bond (56 to 158 gsm)
Description	Bond papers are commonly used for letterheads, stationary, and business
	forms. Properties include whiteness, uniform finish, durability, and good
	formation. Bond papers accept ink readily and are easily erased.
Selection tips	Select a smooth paper with good formation for best image quality
Storage tips	Follow general guidelines in Chapter 2, Managing your paper supply.
Usage tips	Follow general usage tips in Table 3-1.

Xerox Nuvera Paper Guide 3-3