Tips by stock type
Table 3-16. Preprinted paper
Usage tips
•Load preprinted letterhead stock with the letterhead facing up and against the inboard (back) edge. The correct orientation is shown on the paper loading label inside the feeder tray.
•If preprinted sheets are trimmed prior to being imaged on the Xerox Nuvera, vacuum or brush the edges to remove debris in addition to fanning the sheets.
•To avoid registration problems due to
•Preprinted sheets must be run uncollated. All sheets in a single paper tray must contain the same preprinted image.
Recycled paper
| Table |
|
|
Description | Recycled papers contain paper that was returned from consumers for |
| recycling. Most recycled papers are made from a combination of new pulp, |
| waste from the |
| which can contain adhesives and inks that are difficult to remove. Recycled |
| papers are less uniform in content and quality than papers made entirely |
| from virgin fibers. |
|
|
Selection tips | • Xerox recycled papers that are recommended for the Xerox Nuvera |
| press offer the best paper handling performance and image quality |
| available. They undergo extensive screening procedures to minimize |
| the amount of inks and plastic particles. |
| • If you want to use |
| quantity before making a large purchase. |
|
|
Storage tips | Follow general guidelines in Chapter 2, Managing your paper supply. |
|
|
Usage tips | Impurities in recycled paper may cause spots on the photoreceptor and |
| machine contamination. |
|
|
Xerox Nuvera Paper Guide |