GETTING STARTED

1STANDBY/ON button (] 8)

Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.

2Disc tray (] 9)

3Display

Disc indicator

SD card indicator

The indicator blinks when reading data from a disc or card.

4SD Card LED

•It is possible to set the LED to turn on/off. (] 20, SD Card LED Control)

5SD card slot (] 9)

6Remote control signal sensor (] 1)

7Open or close the disc tray (] 9)

8Search/Slow-motion/Skip (] 10)

Search:

Press and hold (During play)

Slow-motion:

Press and hold (During pause)

Skip:

Press

9Start play (] 9)

0Pause (] 10) q Stop (] 10)

Rear panel terminals (] 4-6)

EASY SETTING

After connecting your new player and pressing the standby/on button, a screen for the basic settings will appear.

Preparation

Turn on the television and select the appropriate video input on the television.

1Press [ STANDBY/ON].

➜ Setup screen appears.

2 Follow the on-screen instructions and make the settings with [, ] and [OK].

➜ “On-screen Language” and “TV Aspect” (] 20) are set.

Tips

•You can perform this setup anytime by selecting “Easy Setting” in the Setup menu. (] 18)

•You can also change these settings individually. (] 18)

•If this unit is connected to a Panasonic TV (VIERA) supporting HDAVI Control 2 via an HDMI cable, then the “On-screen Language” and “TV Aspect” setting information on the TV are captured from the TV.

8 En