SETTINGS

Changing the speaker setting to suit your speakers

When connecting to an amplifier/receiver to enjoy multi-channel surround sound, use the following settings on this unit if they cannot be set on the amplifier/receiver. The settings are not effective when outputting bitstream signals.

English

 

Center

 

 

 

 

Front (L)

L

ms

C

dB

R

Front (R)

 

0.0

0.0

 

 

 

 

 

 

 

dB

 

 

 

dB

 

 

0.0

 

 

 

 

 

 

 

 

0.0

 

 

 

 

 

 

 

Complete

Complete

 

 

dB

SW

Subwoofer

Test

Test

 

 

0.0

 

 

 

dB

ms

dB

 

 

 

LS 0.0

0.0

0.0

RS

 

 

 

LB

ms

RB

 

 

 

 

0.0

 

 

(LS) Surround (RS)

 

(LB) Surround back (RB)*

*Surround back channel is enabled only when the unit is connected to an amplifier/ receiver supporting HDMI 7.1 channel audio.

Speaker presence and size ( )

1 Press [ , , , ] to select the speaker icon ( ) and press [OK].

2Press [, ] to select the setting and press [OK].

Icon examples:

 

 

 

 

 

 

 

 

 

 

Surround speaker (LS)

LS

 

LS

 

 

• Large: Select when the speaker supports

 

 

 

 

 

 

 

 

low-frequency (under 100 Hz)

Large

 

Small

 

No

reproduction.

 

 

 

 

 

•Small: Select when the speaker does not support low-frequency reproduction. In order to make an ideal listening environment, settings of speaker sizes may be automatically adjusted.

For example, if the subwoofer is set to “No”, the front speakers will automatically be set to “Large”. (In this case, we recommend connecting a speaker that can reproduce bass below 100 Hz.)

Delay time ( )

For optimum listening with 7.1/5.1-channel sound, all the speakers, except for the subwoofer, should be the same distance from the seating position.

If you have to place the center, surround and surround back speakers closer to the seating position, adjust the delay time to make up for the difference.

If either distance

or

is less than

, find the difference in the relevant table and

change to the recommended setting.

 

1Press [ , , , ] to select the delay time box () and press [OK].

2Press [ , ] to select the setting and press [OK].

5.1ch speaker connection

 

7.1ch speaker

 

 

Approximate room dimensions

connection

 

: Actual

 

 

C

 

 

 

C

 

 

 

L

C

R

 

L

C

R

 

speaker

 

 

position

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SW

: Ideal speaker

 

 

 

 

 

 

 

 

 

 

SW

LS

LS

 

RS

RS

position

 

 

 

 

 

 

 

 

 

 

 

 

 

: Primary listening

 

LS

RS

 

LB

 

RB

 

distance

 

 

LS

RS

 

LB

 

RB

 

 

 

Circle of constant primary listening distance

 

 

 

 

Center speaker

 

 

 

Surround/Surround back

Difference

 

 

Setting

 

speakers

 

 

 

 

 

 

 

 

 

Approx. 34 cm (1 ft. 1 in.)

 

1.0 ms

Difference

 

 

Setting

Approx. 68 cm (2 ft. 2 in.)

 

2.0 ms

Approx. 170 cm (5 ft. 6 in.)

5.0 ms

Approx. 102 cm (3 ft. 4 in.)

3.0 ms

Approx. 340 cm (11 ft. 1 in.)

10.0 ms

Approx. 136 cm (4 ft. 5 in.)

4.0 ms

Approx. 510 cm (16 ft. 8 in.)

15.0 ms

Approx. 170 cm (5 ft. 6 in.)

5.0 ms

 

 

 

 

 

Channel balance (

)

 

 

 

 

 

 

This does not work when connected with the HDMI terminal and “HDMI Audio Output” (] 20) is set to “On”.

1Select “Test” and press [OK]. A test signal is output.

Front (L) Center Front (R) Surround (RS)

Surround (LS) Surround Back (LB)* Surround Back (RB)*

* Test signal is output only when the unit is connected using HDMI AV OUT terminal.

2While listening to the test signal, press [ , ] to adjust the volume of each speaker Front speakers: 0.0 to – 6.0 dB

Center and surround speakers: 0.0 to –12.0 dB

•You cannot adjust the volume of surround back speakers.

3Press [OK].

The test signal stops.

•No signal is output for the subwoofer. To adjust its volume, play something, then return to this screen to adjust to suit your taste.

4Press [ , , , ] to select “Complete” and press [OK].

21 En