REFERENCE

MESSAGES

The following messages or service numbers appear on the television or unit’s display when something unusual is detected during startup and use.

■ On the television

 

Page

Cannot play.

• You inserted an incompatible disc (Discs recorded in PAL video, etc.).

2, 3

 

 

 

Cannot display on this unit.

• You tried to play a non-compatible image.

3

 

• Confirm “SD” on the unit’s display is not blinking and re-insert the card.

–

 

 

 

No disc

• The disc may be upside down.

–

 

 

 

This operation is currently disabled.

• The operation is prohibited by the unit or disc.

–

 

 

 

■On the unit’s display

F99

 

•

The unit fails to operate properly. Press [STANDBY/ON] on the main unit to switch the unit

–

 

 

 

to standby for 3 seconds. Now press [STANDBY/ON] on the main unit again to turn the

 

 

 

 

unit on.

 

 

 

 

 

HDMI ONLY

•

Some BD-Video discs can only be output with HDMI.

–

 

 

 

 

No PLAY

•

There is a viewing restriction on a BD-Video or DVD-Video.

18

 

 

 

 

No READ

•

The disc is dirty or badly scratched. The unit cannot play.

–

 

 

 

 

PLEASE WAIT

•

Displayed when the unit is started and turned off. This is not a malfunction.

–

 

 

•

The unit is carrying out its recovery process. You cannot operate the unit while “PLEASE

–

 

 

 

WAIT” is displayed.

 

 

 

 

 

UNFORMAT

•

You inserted an unformatted DVD-RAM, DVD-RW, DVD+RW, an unused DVD+R,

–

 

 

 

DVD+R DL or DVD-RW (DVD-Video format).

 

 

 

 

 

UNSUPPORT

•

You have inserted a disc the unit cannot play.

2, 3

 

 

 

 

 

U59

 

•

The unit is hot.

–

 

 

 

The unit switches to standby for safety reasons. Wait for about 30 minutes until the message

 

 

 

 

disappears.

 

 

 

 

Select a position with good ventilation when installing the unit. Do not block the cooling fan

 

 

 

 

on the rear of the unit.

 

 

 

 

 

 

U72

 

•

The HDMI connection acts unusually.

–

U73

 

 

– The connected equipment is not HDMI compatible.

 

 

 

 

– Please use HDMI cables that have the HDMI logo (as shown on the cover).

 

 

 

 

– The HDMI cable is damaged.

 

 

 

 

 

 

H

or F

•

There is something unusual. (The service number displayed after H and F depends on the

–

 

 

 

unit’s condition.)

 

 

 

•

Check the unit using the troubleshooting guide. If the service number does not disappear, do

23-25

 

 

 

the following.

 

 

 

 

1 Disconnect the plug from the AC outlet, wait a few seconds, then reconnect it.

 

 

 

 

2 Press [STANDBY/ON] to turn the power on. (The unit may be fixed.)

 

 

 

 

If the service number does not disappear despite doing the above, request service from the

 

 

 

 

dealer. Inform the dealer of the service number when requesting service.

 

 

 

 

 

 

DISC AND CARD HANDLING

Clean discs

DO

DO NOT

Wipe with a damp cloth and then wipe dry.

Disc and card handling precautions

•Handle discs by the edges to avoid inadvertent scratches or fingerprints on the disc.

•Do not attach labels or stickers to discs (This may cause disc warping, rendering it unusable).

•Do not write on the label side with a ball-point pen or other writing instrument.

•Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent.

•Do not use scratch-proof protectors or covers.

•Clean any dust, water, or foreign matter from the terminals on the rear side of the card.

•Do not use the following discs:

–Discs with exposed adhesive from removed stickers or labels (rented discs etc).

–Discs that are badly warped or cracked.

–Irregularly shaped discs, such as heart shapes.

MAINTENANCE

Clean this unit with a soft, dry cloth

•Never use alcohol, paint thinner or benzine to clean this unit.

•Before using chemically treated cloth, read the instructions that came with the cloth carefully.

•Cleaning of the lens is generally not necessary.

•Do not use any lens cleaners as they may damage the unit.

The model number and serial number of this product can be found on either the back or the bottom of the unit.

Please note them in the space provided below and keep for future

reference.

 

MODEL NUMBER

BD-S2900

SERIAL NUMBER___________________________________________

User memo:

DATE OF PURCHASE _______________________________________

DEALER NAME ___________________________________________

DEALER ADDRESS _________________________________________

___________________________________________________________

TELEPHONE NUMBER ______________________________________

26 En