SETTINGS
Regarding 7.1ch LPCM
The settings described below are recommended to output as the original format.
–Connect the unit with the HDMI AV OUT terminal*1
–Set
■“Display” tab
Status Messages | • | Automatic | • | Off |
|
Choose whether to show status messages automatically. |
|
|
|
|
|
|
|
|
|
|
|
• | English | • | Français | • Español | |
Choose the language for these menus and |
|
|
|
|
|
|
|
|
|
|
|
Screen Saver Function | • | On: |
|
|
|
This is to prevent | If there is no operation for 10 minutes or more, the displayed screen switches to the other | ||||
• When this is set to “On”, the | states automatically. |
|
| ||
[Only when connecting with an HDMI cable or a component video cable and |
|
|
| – When the Direct Navigator or FUNCTIONS menu is displayed, the | |
“HDMI Resolution” (] below) is set to any other mode than “480p”, or |
|
|
| display returns to the screen saver mode. | |
“Component Video Resolution” (] below) is set to “720p” or “1080i”] |
|
|
| – When CD or MP3 is played, the display returns to the screen saver | |
|
|
|
| mode. (Playback continues.) | |
|
|
|
| – When still pictures are shown (except for slideshows), the display | |
|
|
|
| returns to the Direct Navigator screen. | |
| • | Off |
|
|
|
|
|
|
|
|
|
FL Display | • | Bright |
|
|
|
Changes the brightness of the unit’s display. | • | Dim: |
| The display is dimmed. | |
| • | Auto: |
| The display is dimmed during playback and bright except playback. | |
|
|
|
|
|
|
SD Card LED Control | • | On | • | Off |
|
Set the lighting method for the lamp by the SD card slot. | • | SD inserted: |
| When this unit is turned on and SD card is inserted, the lamp is lighted. | |
|
| ||||
License | Information about the software used by this unit is displayed. | ||||
■ “TV/Device Connection” tab
TV Aspect | When connected to a 4:3 aspect television: |
|
|
| |||||
Set to match the type of television connected. | • | 4:3 Pan & Scan: |
| Video recorded for a widescreen is played as Pan & Scan (unless | |||||
|
|
|
|
| prohibited by the producer of the disc). When playing | ||||
|
|
|
|
| is output as “4:3 Letterbox”. |
|
| ||
|
| • | 4:3 Letterbox: |
| Video recorded for a widescreen is played in the letterbox style. | ||||
|
| When connected to a 16:9 widescreen television: |
|
| |||||
|
| • | 16:9: |
| Video recorded for 4:3 aspect screen is displayed as a 4:3 ratio image | ||||
|
|
|
|
| in the center of the screen. |
|
| ||
|
| • | 16:9 Full: |
| Video recorded for 4:3 aspect screen is displayed as a horizontally | ||||
|
|
|
|
| stretched 16:9 image. |
|
| ||
|
|
|
|
|
|
|
|
|
|
HDMI Connection |
|
|
|
|
|
|
|
| |
• Press [OK] to show the following settings. |
|
|
|
|
|
|
|
| |
|
|
|
|
|
| ||||
| HDMI Video Mode | • | On: |
| Images are output from the HDMI terminal in the resolution set in | ||||
| Select “On” when video is output from HDMI AV OUT terminal. |
|
|
| “HDMI Resolution”. Video from COMPONENT VIDEO OUT | ||||
|
|
|
|
| terminal is output as “480i”. |
|
| ||
|
| • | Off: |
| Images are not output from the HDMI terminal. | ||||
|
|
|
|
| Video from COMPONENT VIDEO OUT terminal is output in the | ||||
|
|
|
|
| resolution set in “Component Video Resolution” explained below. | ||||
|
|
|
|
|
| ||||
| HDMI Resolution | • | Auto: |
| Automatically selects the output resolution best suited to the connected | ||||
| The items supported by the connected devices are indicated on the screen as |
|
|
| television (1080p, 1080i, 720p or 480p). |
| |||
| “*”. When any item without “*” is selected, the images may be distorted. | • | 480p | • | 720p | • | 1080i | • | 1080p |
|
| When the unit is connected to an amplifier/receiver that does not support the resolution set on | |||||||
|
| the unit, the video cannot be output properly. In this case, use the HDMI cable to connect the | |||||||
|
| unit to the TV and then connect the unit to the amplifier/receiver using a cable other than | |||||||
|
| HDMI. |
|
|
|
|
|
| |
|
|
|
|
|
| ||||
| • | On: |
| Images in 24p are output in 24p as they are. | |||||
| When playing |
|
|
| (This is effective only when “HDMI Resolution” is set to “Auto” or | ||||
| 1/24 second |
|
|
| “1080p” and “TV Aspect” is set to “16:9” or “16:9 Full”.) | ||||
| • This item can be set only when the unit is connected to a TV with an HDMI |
|
|
| However, |
|
|
|
|
| terminal that supports 1080/24p input. |
|
|
| – when video is being output at 24 frames, images from any other | ||||
|
|
|
|
| terminal than the HDMI terminal may not be output properly. | ||||
|
|
|
|
| – when images other than 24p are played, images are output at 60p. | ||||
|
| • | Off |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| HDMI RGB Output Range | • | Standard |
|
|
|
|
|
|
| Effective when connected to a device that only supports RGB output. | • | Enhanced: |
| When the black and white images are not distinct. | ||||
|
|
|
|
|
|
|
|
|
|
| HDMI Audio Output | • | On |
|
|
|
|
|
|
| This setting selects whether or not to output audio from HDMI. | • | Off: |
| When the TV is connected to this unit using an HDMI cable, and this | ||||
|
|
|
|
| unit is also connected to other devices, such as an amplifier/receiver | ||||
|
|
|
|
| using an optical digital audio cable or a coaxial cable. | ||||
|
|
|
|
|
| ||||
| HDMI Control | • | On: |
| Select when you want to use linked operations with the TV. | ||||
| Set to use linked operations with the TV function when connected with an | • | Off: |
| Select when you do not want to use linked operations with the TV. | ||||
| HDMI cable to a device that supports the same function. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Component Video Resolution | • | 480i | • | 480p | • | 720p | • | 1080i | |
This sets the video output resolution when using the component video terminal. | Even if you select “720p” or “1080i”, images are output in 480p when you play | ||||||||
|
|
|
|
|
| ||||
Speaker | • | Multi Channel: |
|
| |||||
You can set the unit to output the best possible sound for your speakers. | • | 2 Channel: |
| When using two speakers. |
|
| |||
|
|
|
|
| 2ch | ||||
|
|
|
|
|
|
|
|
|
|