Top Power connector Bottom | Yamaha CRW3200NB guide

Preparing the CRW3200E Drive

5 Connect the 4-pin internal power cable of the computer (+12V and +5V) to the power connector on the rear panel of the CRW3200E drive.

Top

	Power connector
Bottom	4-pin internal power cable
	4-pin internal power cable

Note

The 4-pin internal power cable cannot be connected if it is upside down. If the connector does not connect easily, check that it is in the correct direction.

6 Tighten four screws which fastened by hand.

7 Attach the computer cover and reconnect the peripheral devices and cables as before.

21

Image 29

Yamaha CRW3200NB manual Top Power connector Bottom

Contents

Page FCC Information U.S.A Achtung English Safety Precautions Iii Warranty Table of Contents High speed writing/reading Features of the CRW3200E DriveSafeBurn Enhanced stability writing technology High fidelity digital audio Front Panel Names and Functions of Parts Names and Functions of Parts Rear Panel Handling Discs Precautions on UseCopyright Disclaimer of Indemnity Discs that can be written on Useable discsCD-R discs CD-RW discs Partial CAV Constant Angular Velocity Computer PC/AT compatible System RequirementsImage file Operating system OS Serial Number Preparing the CRW3200E DrivePreparing tools Serial Number Preparing the CRW3200E Drive Decide the Installation Method Replacing an existing IDE device with the CRW3200E drive Installing the CRW3200E drive as an additional drive Example 1 As a secondary slave For additional drive Examples of connecting the CRW3200E drive IDE Preparing the CRW3200E Drive Set the Jumper Switch Cable Select Csel Replacing Install the CRW3200E DriveInstalling the CRW3200E drive as an additional drive Connect the included 40-pin IDE cable Audio CD playback Connect an audio cable if necessary Preparing the CRW3200E Drive Analog connection Spdif Digital connection Top Power connector Bottom Check Recognition of the CRW3200E Drive When using Windows 95/98/98 Second Edition/Me When using Windows XP When using Windows 2000 Professional Check When using Windows 2000 Professional/XP DMA Direct Memory Access Install CD Writing Software Loading/Ejecting a Disc Loading/Ejecting a Disc Manually Ejecting a Disc Is the computer turned on? Troubleshooting Is the disc tray opened when the computer is restarted? Disc tray does not open when you press the eject buttonIs each IDE device set respectively? Is any CD writing software being used? No data can be read from a disc Disc is ejected without order or it comes out spontaneously For Windows Me Playback of an audio CD CD-DA cannot be heard For Windows XP Is the power capacity of your computer sufficient? Error message Buffer Underrun is displayedOther problems Checking the firmware version in your CRW3200E drive FirmwareYamaha CD-R/RW Drive website For Windows 95/98/98 Second Edition/Me Supported Formats Write Read Play back *4 CRW3200E Drive Specifications Data Capacity CRW3200E drive conforms to the following specifications CRW3200E Drive Specifications Safety/EMC Compliance Buffer Underrun Protection Function Technical NotesWriting Methods Disc-at-Once DAO Session-at-Once SAO Track-at-Once TAO Packet Writing Canada