Yamaha CRW3200NB manual Troubleshooting, Is the computer turned on?

Troubleshooting

Refer to the YAMAHA CD-R/RW Drive website for the latest support data, including information on troubleshooting.

YAMAHA CD-R/RW Drive website URL:

http://www.yamaha.co.jp/english/product/computer/

Europe:

http://www.yamaha-it.de/

1 The CRW3200E drive is not turned on. (The front panel LED does not light.)

●Is the computer turned on?

Turn on the computer.

●Is the 4-pin internal power cable connected properly to the CRW3200E drive?

Turn off the computer, and remove the computer cover. Check that the connector of the 4-pin internal power cable is connected to the CRW3200E drive in the correct direction, and that the 4-pin internal power cable is fully connected. (P. 9, 21)

●If the CRW3200E drive is connected to another 4-pin internal power cable that properly conducts power to another device, is the CRW3200E drive turned on?

Turn off the computer. Be sure that the CRW3200E drive is connected to another 4-pin internal power cable that properly conducts power to another device, and check that the CRW3200E drive is turned on when turning on the computer. (P. 9, 21)

If the drive is turned on, the computer’s power unit may be damaged.

If the drive is not turned on, contact the store of purchase or your nearest Yamaha dealer (listed at the back of this manual).

2 The CRW3200E drive is not recognized by the operating system. (P. 22)

●Is the IDE cable connected properly to the CRW3200E drive?

Turn off the computer and remove the computer cover. Check that the connector of the IDE cable connected to the CRW3200E drive is in the correct direction, and that the IDE cable is fully connected. (P. 9, 17)

Then check that the pins of the IDE interface connector of the CRW3200E drive are not bent.

28