Preparing the CRW3200E Drive
Preparing tools
• Phillips screwdriver: Use the proper screwdriver for the screws to install the CRW3200E drive into the computer.
• Narrow pliers: Insert and remove the included plastic shunt for the jumper switch.
Serial Number
The serial number is printed on the label on the top of your CRW3200E drive. When you have a question about the drive, or need user support services, the serial number is required.
Please write the serial number down in the space below prior to installing the CRW3200E drive into your computer. It will be difficult to check the serial number after installation.
Serial number
(10 characters: 3 letters +
7 numbers)
Serial Number
8
