Yamaha CRW3200NB Install the CRW3200E Drive, Installing the CRW3200E drive as an additional drive

3 Install the CRW3200E Drive

The following describes how to install the CRW3200E drive as an additional drive for example.

1 Secure the installation location.

Installing the CRW3200E drive as an additional drive

Remove the front cover from the 5 ¼ -inch drive bay.

Replacing

Remove all cables connected to the CD-ROM or other devices to be replaced. Then remove the device itself from the computer.

Audio cable

IDE cable 4-pin internal

power cable

Note

•Be careful not to damage the various cables connected to the rear panel of the CD-ROM drive.

•The audio cable is usually caught by the hook at the top of the connector. Release the hook and remove the connector without using excessive force.

•Do not apply excessive force to the CD-ROM drive or cables.

•Hold the cable by the connector to remove the cable. Pulling the cable itself with excessive force may damage the wires inside.

16