GETTING STARTED

■ Inserting batteries into the remote

■ Using the remote control

control

Use the remote control within 6 m of the DVD controller

 

and point it toward the remote control sensor.

3

Press

 

2

 

1

 

 

3

1Press on the battery cover and open the cover.

2Insert the two supplied batteries (AA, R6, UM-3) into the battery compartment.

Insert the batteries according to the polarity markings (+ and –).

3Close the battery cover.

Replacing the batteries

If the batteries run low, the effective operation distance of the remote control decreases considerably. If this happens, replace the batteries with two new ones as soon as possible.

Notes

–Do not use an old battery together with new one.

–Do not use different types of batteries (for example, alkaline and manganese) together. Each type of battery has its own characteristics even if they are similar in shape.

–If the batteries run out, immediately remove them from the remote control to prevent an explosion or acid leak.

–Dispose of the batteries according to the regional regulations.

–If a battery starts leaking, dispose of it immediately.

Be careful not to let leaking battery acid come into contact with your skin or clothing. Before inserting new batteries, wipe the compartment clean.

–Replace the batteries within two minutes to preserve the preset code in the remote control.

Hint

Remove the transparent sheet before using the remote control.

STANDBY / ON

EJECT

Within 6 m

30˚ 30˚

Basic operation of the remote control

1Use the Input selection buttons on the remote control to select the input source you wish to control (for

example DVD/USB).

→ The selected source appears in the front panel display.

When the button contains several input sources such as DVD/USB and INPUT 1-4buttons, the input source switches each time you press the button.

 

CH

 

 

TV VOL

VOLUME

 

TV INPUT

TUNER

MUTE

Input

 

 

 

 

 

 

selection

DVD/ USB

INPUT 1-4

DOCK

buttons

 

 

 

POSITION

AREA SOUND

TEST

 

2Operate the desired function (for example, hor b / a).

Notes

–Be careful not to spill liquid on the remote control.

–Be careful not to drop the remote control.

–Do not leave the remote control in the following places:

–hot or humid places, such as near a heater or in a bathroom

–extremely cold places

–dusty places

–To operate your TV with the remote control, you need to set the preset code.

Refer to “Setting the preset code” on page 66 for how to change the preset code.

PREPARATION

English

21 En