USEFUL OPERATION

The next time you turn on the system after selecting an item between 1 and 4 in the system menu, the system starts with DVD as an input source.

Setting the preset code

You can use the remote control to control the power, TV input, channel, and volume for up to two components, such as TV or Set top box (STB). Set the preset codes depending on the components.

Hint

The preset cords are set to “298” (TV) and “748” (STB) as the default settings.

 

DVX-700

WP87010

 

STANDBY/ON

 

POWER

 

TV

STB

 

 

 

FUNC.

10KEY

Switches TV or STB.

 

 

 

MOVIE

MUSIC

SPORTS

GAME

STEREO

ENHANCER

NIGHT

SLEEP

DISP. MODE

AUDIO DELAY

ZOOM

ON SCREEN

ON BLUETOOTH

OFF

 

A-E/CATAUDIO.

ENTERSUB ITLE

ANGLE-E

SETUP

 

 

RETURN

CODE SET

TV/ STB

1Switch TV/STB to the side you want to set.

2Press and hold CODE SET, then press POWER.

3Point the remote control toward the remote control sensor on the DVD controller and enter a 3-digit code while holding CODE SET.

Refer to “LIST OF PRESET CODES” on the appendix for the corresponding codes.

4Release CODE SET.

If the preset cord is set correctly, “PRESET OK!” appears in the front panel display.

Note

If you have failed to set the preset code, “PRESET NG!” appears in the front panel display. Try to set it again.

Hints

When you select the preset cord for “cable” or “DBS”, you can use only POWER and CH +/–. If a preset cord for “TV” is set on the other side, you can use TV VOL +/– or TV INPUT to control TV.

To set another preset code, switch TV/STB to the other side and repeat the step 2 to step 4.

Operating a TV/STB

Once you set the preset code, you can operate your TV/ STB.

1Switch TV/STB to the side, which the preset code is set.

2Press the button you want to operate.

66 En