LISTENING TO FM BROADCASTS
Notes
–Any stored station data existing under a preset number is cleared when you store a new station under the same preset number.
–If the number of received stations does not reach 40 (A1 to E8), automatic preset tuning automatically stops after searching for all the available stations.
If the desired station is not stored, or a station is not stored to the desired preset group and number, preset the station manually. Refer to Manual station preset for details.
Manual station preset
Use this feature to store the radio stations manually.
1Tune into a station.
Refer to “Basic tuning operation” on page 46 for the details.
2Press MEMORY.
The MEMORY indicator flashes in the front panel display for approximately 30 seconds.
Press MEMORY again to cancel while the MEMORY indicator is flashing.
Flashes
A :FM 88.9 MHz
3Press 
/ 
repeatedly to select a preset group (A to E) while the MEMORY indicator is
flashing.
The selected preset group appears.
Flashes
A :FM 88.9 MHz
Preset group
4Press PRESET/CH 
/ 
to select a preset number (1 to 8) while the MEMORY indicator is flashing.
Flashes
A1:FM 88.9 MHz
Preset number
5Press MEMORY to confirm the preset.
A1:PRESET OK
After “A1:PRESET OK” appears in the front panel display, the frequency appears with the preset group and number you selected. The MEMORY indicator disappears from the front panel display.
A1:FM 88.9 MHz
The displayed station has been stored as A1.