USING OPTIONAL EQUIPMENT
Pairing the Yamaha Bluetooth™ wireless audio receiver and your Bluetooth™ component
Pairing must be performed before using a Bluetooth component with the Yamaha Bluetooth wireless audio receiver connected to the system for the first time or if the registered pairing data has been deleted. “Pairing” refers to the operation of registering a Bluetooth component for Bluetooth communications.
To ensure security, a time limit of 8 minutes is set for the pairing operation. Please read and fully understand all the instructions before starting.
1Connect the Yamaha Bluetooth wireless audio receiver to the DOCK terminal of the subwoofer/ system control. (Page 20)
2Press DOCK to set the input source to DOCK.
3Turn on the Bluetooth component you want to pair with, and then enter pairing mode.
Refer to the instruction manual of your Bluetooth component for details.
4Press and hold BLUETOOTH ON for more than 3 seconds to start pairing.
“Searching...” appears when the pairing starts. While the Yamaha Bluetooth wireless audio receiver is in pairing mode, the DOCK indicator flashes in the front panel display.
Hint
To cancel the pairing, press BLUETOOTH OFF.
5Check that the Bluetooth component detects the Yamaha Bluetooth wireless audio receiver.
If the Bluetooth component detects the Yamaha Bluetooth wireless audio receiver, the audio receiver name
6Select the Yamaha Bluetooth wireless audio receiver in the device list of the Bluetooth component, and then enter the pass key “0000” on the Bluetooth component.
When the pairing procedure is successful, “Completed” appears in the front panel display.
Hints
–If the pairing is not completed within 8 minutes, “Not found” appears and the DOCK indicator is turned off in the front panel display.
–If the pairing is canceled during the pairing, “Canceled” appears in the front panel display.
Note
The Yamaha Bluetooth wireless audio receiver can be paired with up to eight Bluetooth components. When pairing is conducted successfully with a ninth component and the pairing data is registered, the pairing data for another least recently used component is deleted.
Establishing a connection
After the pairing is completed, perform the connecting operation on the system or on the Bluetooth component to enable communication between them. The connecting operation on the system is only available for the most recently connected Bluetooth component.
1Press DOCK to set the input to DOCK.
2Press BLUETOOTH ON to start a connection. “Searching...” appears in the front panel display. When the system finds the last connected Bluetooth component, “BT connected” appears in the front panel display for 3 seconds.
Hints
–If the system cannot find the last connected Bluetooth component, “Not found” appears in the front panel display.
–If you want to establish a connection with a Bluetooth component other than the one most recently connected to, connect from that Bluetooth component. Refer to the instruction manual of your Bluetooth component for details.
Disconnecting
Press DOCK, and then BLUETOOTH OFF to disconnect the system from the Bluetooth component. “Disconnected” appears in the front panel display.
Playing back the Bluetooth component
You can play back your Bluetooth component using the supplied remote control.
You can also play back your Bluetooth component by operating it directly.
Hint
Operation using the remote control is available only when the connection is established between the Bluetooth component you want to play back and the system.