■Setting the video input/output
Notes
–Make sure that you have completed all the necessary connections (Refer to “Connecting a TV” on page 17).
–If the settings you have selected are not appropriate, you can reset DVD settings to the initial factory settings (Refer to “System menu” on page 65).
1Press DVD/USB repeatedly until “DVD” appears in the front panel display.
2Turn on the TV and set to the correct
channel.
→ You should see the background screen on the TV.
–Usually this channel is between the lowest and highest channels and may be called FRONT, A/V IN or VIDEO. See your TV manual for more details.
–Or, you may go to channel 1 on your TV, then press the Channel down button repeatedly until you see the Video In channel.
–Or, the TV remote control may have a button or switch that chooses different video modes.
GETTING STARTED
Setting the TV display
Set the aspect ratio of the DVD controller according to the TV you have connected. The format you select must be available on the disc. If it is not, the TV display setting will not affect the picture during playback.
TOP MENU | PRESET/CH | MENU | 3 |
INFO. |
|
| PREPARATION |
|
|
| |
ENTER |
| ||
SETUP |
| RETURN |
|
| TV/ STB | CODE SET |
|
|
|
|
CH
1Press SETUP on the remote control.
DVD setup menu is displayed on the screen.
Play Mode | Video Adjust |
Initial Setting | Disc Navigator |
2 Press 
/ 
/ 
/ 
on the remote control to highlight [Initial Settings], and then press ENTER.
| Initial Setting |
|
| |
|
|
|
|
|
|
| TV Screen | 4:3 (Letter Box) |
|
| Video Output |
| ||
| Language | Component Out | Interlace |
|
| Display | HDMI Resolution | 720x480p |
|
| Options | HDMI Color | Component |
|
|
|
|
|
|
|
|
|
|
|
3 Press 
/ 
on the remote control to highlight [Video Output], and then press ENTER.
English