TROUBLESHOOTING

Bluetooth

Status message

Cause

Remedy

See

page

 

 

 

 

 

 

 

Searching...

The Yamaha Bluetooth wireless audio

--

--

 

receiver (such as YBA-10, sold

 

 

 

separately) and the Bluetooth

 

 

 

component are in the process of the

 

 

 

pairing.

 

 

 

 

 

 

 

The Yamaha Bluetooth wireless audio

--

--

 

receiver and the Bluetooth component

 

 

 

are in the process of establishing the

 

 

 

connection.

 

 

 

 

 

 

Completed

The pairing is completed.

--

--

 

 

 

 

Canceled

The pairing is canceled.

--

--

 

 

 

 

Not found

The system cannot find the Bluetooth

--

--

 

component while performing the

 

 

 

pairing or trying to connect to the

 

 

 

Bluetooth component.

 

 

 

 

 

 

BT connected

The connection between the Yamaha

--

--

 

Bluetooth wireless audio receiver and

 

 

 

the Bluetooth component is

 

 

 

established.

 

 

 

 

 

 

Disconnected

The Bluetooth component is

--

--

 

disconnected from the Yamaha

 

 

 

Bluetooth wireless audio receiver.

 

 

 

 

 

 

Not Available

The pairing is performed when the

Perform the pairing when the Yamaha

61

 

Yamaha Bluetooth wireless audio

Bluetooth wireless audio receiver is not

 

 

receiver is connected to the Bluetooth

connected to the Bluetooth component.

 

 

component.

 

 

 

 

 

 

Note

In case of a transmission error without a status message appearing in the front panel, check your Bluetooth component.

Disc

Problem

Cause

Remedy

See

page

 

 

 

 

 

 

 

Some functions do not work.

Not all discs support all of the disc

Try another disc.

2

 

playback functions of this unit.

 

 

 

 

 

 

Playback does not start, the sound or

The disc is not properly set.

Place the disc, label-side up.

26

picture is distorted or playback is

 

 

 

The disc is dirty.

Check the disc and clean as necessary.

2

stopped halfway.

 

 

 

 

The loaded disc in not supported.

Use only supported disc formats.

2

 

 

The Disc that is not compliant with the

 

 

 

CD Audio specification (e.g. copy

 

 

 

control CD, the non-DVD side of the

 

 

 

DualDisc, etc.) may not play.

 

 

 

 

 

 

Condensation on the pickup lens. When

Wait for one to two hours for the

--

 

this system is moved from a cold

condensation to evaporate, then try

 

 

environment to a warm one,

again.

 

 

condensation may form on the pickup

 

 

 

lens.

 

 

 

 

 

 

After loading a DVD-Video, the same

The Resume/Last memory function is

Press stwice to set the Resume

29

picture is usually displayed and you

effective.

function to off.

 

cannot move to the main contents or

 

 

 

 

Reset the DVD setting to the initial

65

the main menu.

 

 

factory settings (DVD INIT) to clear

 

 

 

 

 

 

the resume point.

 

 

 

 

 

8

INFORMATION ADDITIONAL

English

71 En