VIDEO ADJUST MENU
This setup is carried out via the TV, enabling you to customize the DVD controller to suit your particular requirements
TOP MENU | PRESET/CH | MENU |
INFO. |
|
|
ENTER | ||
SETUP |
| RETURN |
|
| CODE SET |
| TV/ STB |
|
TV INPUT | TUNER | MUTE |
DVD/ USB | INPUT | DOCK |
POSITION AREA SOUND TEST
1Press DVD/USB repeatedly to switch the input source to DVD.
2Press SETUP on the remote control. DVD setup menu appears.
Play Mode | Video Adjust |
Initial Setting | Disc Navigator |
3Press 
/ 
/ 
/ 
to highlight [Video Adjust], then press ENTER.
Video Adjust
Sharpness Fine
Brightness 
Standard
Contrast Soft
Gamma
Hue
Chroma Level
4Select the item that you want to adjust, press ENTER,
and then press 
/ 
/ 
/ 
to adjust the image quality.
You can adjust the following items in Video Adjust menu.
[Sharpness]
Select this to adjust the sharpness. Choose from Fine/ Standard/Soft.
[Brightness]
Increase or decrease the value to adjust the brightness. You can adjust the value from 
/ 
.
[Contrast]
Increase or decrease the value to adjust the sharpness. You can adjust the value from 
/ 
.
[Gamma]
Select this to adjust the darkness. Choose from High/ Medium/Low/Off.
[Hue]
Select this to adjust the balance of green and red. You can adjust the value from Green 9 to Red 9 using 
/ 
.
[Chroma Level]
Select this to adjust the color density. You can adjust the value from 
/ 
.
5Press ENTER to confirm. Repeat steps 3 and 4 if necessary.
6Press SETUP to close the menu.
Hints
–Once you confirm the values, you can select other items in Video Adjust menu.
–If the settings you have selected are not appropriate, you can reset DVD settings to the initial factory settings (Page 65).
]
Note
The sharpness setting does not affect the HDMI signal.
5
MENU SETUP DVD
English