PIN Nº
1
2
3
4
5
6
7
8
9
10
11
12
CONNECTOR PINS
(FEMALE)
FUNCTION
PIN Nº
FUNCTION
VCA EXT 1
13 MUTE EXT 3
VCAEXT 2 14
MUTE EXT 4
VCA EXT 3
15
MUTE EXT 5
VCA EXT 4 16 MUTE EXT 6
VCA EXT 5
17
MUTE EXT 7
VCA EXT 6
18
MUTE EXT 8
VCA EXT 7
19 GND
VCA EXT 8
20 GND
GND
21 GND
NC
22 INPUT CUE EXT
MUTE EXT 1
23 SOLO EXT
MUTE EXT 2 24
GND
Figure 2-13. VCA/MUTEConnector
Pin Assignments
130. GROUP OUT (1 - 8)
These eight male XLR connectors output signal
from the eight group mixing busses, just after the
Group Master Faders. They may be used for
submixed feeds to a remote console (i.e., to a stage
monitor console or a broadcast remote), for feeds to
a multitrack tape recorder, or for feeds to a multi-
zone sound system, depending upon the
application.
131. MTRX OUT (1 - 8)
These eight male XLR connectors output signal
from the eight 11:1 matrix mixes, after the MTRX
MASTER controls and ON/off switches. They may
be used for feeding mono or stereo tape recorders,
multiple zones of a sound system, multiple sound
systems, or remotes, depending upon the
application. In some instances, these outputs can
be used for effects sends or for monitors.
132. AUX OUT (1 - 8)
These eight male XLR connectors output signal
from the eight auxiliary mixing busses, just after
the Aux Master LEVEL controls. They may be used
for echo/effects sends, for stage foldback (stage
monitors), for auxiliary mono or stereo program
feeds to remote locations and/or tape recorders, and
so forth.
133. STEREO OUT (L, R)
This pair of XLR connectors output the stereo mix
after the STEREO MASTER fader. They may be
used to feed a stereo sound system, master tape
recorder, remote source, or a monitor system.
Figure 2-14. PM4000 Rear Panel: Bus Output Connectors
Page 2-32