6.11 Stereo Input Channel Feed to
Determination of which stereo modules actually
Monitor Module ST IN 3 or ST IN 4
contribute to the monitors when the monitor module’s
ST IN3 or ST IN4 switch is engaged is dependent on the
The Monitor module has provisions for selection and
monitoring of signals assigned from the “Stereo In 3” position of a slide switch in each stereo input module.
and “Stereo In 4” modules. However, the stereo module Locate the switch (Fig. 6-11) and set it as shown so
numbers are arbitrarily designated; stereo modules can that a given module either does not contribute anything
be located in just about any mainframe input module to these monitor busses, or so it contributes to ST IN3
location, and more than one can contribute to the ST or ST IN4 bus.
IN3 or ST IN4 monitor mix.
Figure 6-11. Internal Switch Position For Stereo Input Module Signal Assigned to
ST IN3, ST IN4 or neither Monitor Selection, and Block Diagram Location.
Page 6-12