6.12 Phase Switch Function: Change
Polarity of Both L and R inputs,
or of L Only
As shipped, the Stereo Input Module’s Phase Swich
(Ø) [8S], which is really a polarity switch, reverses the
polarity of both the left and right inputs to the module.
If you wish to alter the polarity of the left input with
respect to the right input, you must reset a switch on
the module’s circuit board. Once this switch is reset to
the alternate position, then engaging the front panel Ø
switch reverses polarity of the channel’s left input only.
See Figure 6-12.
Figure 6-12. Internal Switch Position For Al;tering the Stereo Input Module Phase
(
ø
)
Switch Function
for Combined L & R Phase Change, or Change of L Input Only, and Block Diagram Location.
Page 6-13