REMOTE CONTROL FEATURES
Setting library codes
You can operate multiple YAMAHA receivers or amplifiers in the same room with the supplied remote control simultaneously. Set the appropriate library code to select and operate the desired component with the supplied remote control.
■Setting remote control AMP ID library
codes
Select one of the following codes to set the remote control AMP ID library code for the component you want to use.
1Press CODE SET using a ballpoint pen or a similar object.
The TRANSMIT indicator on the remote control flashes twice.
TRANSMIT
CODE SET
Flashes
2Press the numeric buttons to enter the code number “00001” or “00002”.
The TRANSMIT indicator on the remote control flashes twice, and the AMP ID library code is changed.
STEREO | MUSIC | ENTERTAIN | MOVIE |
| |
1 | 2 | 3 | 4 |
| |
STANDARD | SELECT | EXTD SUR. | DIRECT ST. | TRANSMIT | |
5 | 6 | 7 | 8 | ||
| |||||
SPEAKERS | ENHANCER | NIGHT | STRAIGHT |
| |
9 | 0 | 10 | ENT. | Flashes | |
|
|
| EFFECT |
| |
AMP ID |
|
| Remote | ||
library code |
| Function | control AMP | ||
| *1 |
|
| ID *2 | |
00001 | To operate this unit using | ID1 | |||
(initial setting) the default code. | (initial setting) | ||||
00002 | To operate this unit using | ID2 | |||
an alternative code. | |||||
|
|
| |||
*1 The remote control setting
*2 The setting of this unit (see page 91)
■Setting remote control TUNER ID library
codes
Select one of the following codes to set the remote control TUNER ID library code for the component you want to use.
1Press TUNER to select “TUNER” as the input source.
TUNER
2Press CODE SET using a ballpoint pen or a similar object.
The TRANSMIT indicator on the remote control flashes twice.
TRANSMIT
CODE SET
Flashes
3Press the numeric buttons to enter the code number “81916” or “81917”.
The TRANSMIT indicator on the remote control flashes twice, and the TUNER ID library code is changed.
STEREO | MUSIC | ENTERTAIN | MOVIE |
| |
1 | 2 | 3 | 4 |
| |
STANDARD | SELECT | EXTD SUR. | DIRECT ST. | TRANSMIT | |
5 | 6 | 7 | 8 | ||
| |||||
SPEAKERS | ENHANCER | NIGHT | STRAIGHT | Flashes | |
9 | 0 | 10 | ENT. | ||
|
|
| EFFECT |
| |
TUNER ID |
|
| Remote | ||
library code |
| Function | control | ||
*1 |
|
| TUNER ID *2 | ||
81916 | To operate this unit using | ID1 | |||
(initial setting) | the default code. | (initial setting) | |||
81917 | To operate this unit using | ID2 | |||
an alternative code. | |||||
|
|
| |||
*1 The remote control setting
*2 The setting of this unit (see page 92)
Notes
•You need to set the corresponding remote control AMP ID of this unit in the advanced setup (see page 91).
•When using multiple YAMAHA receivers/amplifiers, you may be able to operate the other components simultaneously with the default code setting. In this case, set one of the alternative codes to operate this unit separately.
Notes
•You need to set the corresponding remote control TUNER ID of this unit in the advanced setup (see page 92).
•When using multiple YAMAHA receivers/amplifiers, you may be able to operate the other components simultaneously with the default code setting. In this case, set one of the alternative codes to operate this unit separately.