SET MENU
■Network information C)INFORMATION
Use this feature to display the network system information.
C)INFORMATION
MAC ADDRESS XX:XX:XX:XX:XX:XX
STATUS
[ENTER]:Return
4 OPTION MENU
Use this menu to adjust the optional system parameters.
4OPTIONMENU 1/2 | 4OPTIONMENU 2/2 |
.A)DISPLAYSET | .E)XM RADIO SET |
B)MEMORYGUARD |
|
C)PARAM.INI |
|
D)MULTI ZONESET |
|
[]/[]:Up/Down | []/[]:Up/Down |
[ENTER]:Enter | [ENTER]:Enter |
Note
The above display is an example.
MAC (Media Access Control) address
MAC ADDRESS
This information displays the MAC address that is assigned to this unit.
Status STATUS
This information displays the current link status of the network.
Display status:
Note
“NO LINK” appears when network connection is not made.
■Display settings A)DISPLAY SET
A)DISPLAYSET | A)DISPLAYSET |
.DIMMER;;;;;;;;;0 | .ON SCREEN;;;;10s |
VIDEOCONV.;;;ON | FL SCROLL;;;CONT |
OSD SHIFT;;;;;;0 | |
GRAYBACK;;;AUTO |
|
[]/[]:Up/Down | []/[]:Up/Down |
[<]/[>]:Select | [<]/[>]:Select |
Dimmer DIMMER
Use this feature to adjust the brightness of the front panel display.
Control range: – 4 to 0
Control step: 1
•Press jto make the front panel display dimmer.
•Press ito make the front panel display brighter.
Video conversion VIDEO CONV.
Use this feature to set whether to convert the video signals input at the VIDEO and S VIDEO jacks.
Choices: ON, OFF
•Select “ON” to convert composite and
•Select “OFF” not to convert any signals.
Notes
•The converted video signals are only output at the MONITOR OUT jacks. When recording a video source, you must make the same type of video connections between each component.
•When composite video or
•You must set “VIDEO CONV.” to “ON” to display the OSD.
•Unconventional signals input at the composite video or