Controlling Zone 2
You can select and control Zone 2 by using the control buttons on the front panel or on the remote control. The available operations are listed as follows:
•Selecting the input source of Zone 2
•Tuning into FM or AM when “TUNER” is selected as the input source of Zone 2 (see page 46)
•Tuning into XM Satellite Radio when “XM” is selected as the input source of Zone 2 (see page 53)
(U.S.A. and Canada models only)
•Enjoying music stored on your iPod stationed in a YAMAHA iPod universal dock (such as
y
The volume level and tonal quality of Zone 2 cannot be adjusted. Adjust the volume control on the amplifier in Zone 2.
USING
2Press ZONE CONTROL to control Zone 2.
The ZONE2 indicator flashes in the front panel display for approximately 5 seconds.
ZONE
CONTROL
ZONE2
Flashes
3Rotate the INPUT selector to select the desired input source while the ZONE2 indicator is flashing in the front panel display.
INPUT
Notes
•You must complete each step while the ZONE2 indicator is flashing in the front panel display. Otherwise, the Zone 2 mode is automatically canceled and this unit returns to the normal operation mode. In this case, repeat the Zone 2 selection procedure.
•The Zone 2 control function is operational only when MASTER ON/OFF on the front panel is pressed inward to the ON position.
■Controlling Zone 2 with the front panel
1Press ZONE 2 ON/OFF to turn on Zone 2.
ZONE 2
ON/OFF
y
ZONE 2 ON/OFF is operational only when MASTER ON/OFF on the front panel is pressed inward to the ON position.
4Press ZONE 2 ON/OFF to set Zone 2 to the standby mode.
ZONE 2
ON/OFF
OPERATION | ADVANCED |
|
|