Enjoying multi-channel sources in 2-channel stereo
You can mix down
Set the component selector switch to AMP and then press STEREO on the remote control repeatedly to select “2ch Stereo”.
AMP
STEREO
SOURCE
1
USING AUDIO FEATURES
Enjoying pure hi-fi stereo sound
The “DIRECT STEREO” mode allows sources to bypass the decoders and DSP processors of this unit so that you can enjoy pure
Set the component selector switch to AMP and then press DIRECT ST. on the remote control to select “DIRECT STEREO”.
AMP
DIRECT ST.
TV
SOURCE
TV
8
2ch Stereo
y
•You can use a subwoofer with this program when “LFE/BASS OUT” is set to “SWFR” or “BOTH” (see page 78).
•You can also select the “2ch Stereo” mode by rotating the PROGRAM selector on the front panel.
Enjoying unprocessed input sources
When this unit is in the “STRAIGHT” mode,
1Set the component selector switch to AMP and then press STRAIGHT on the remote control to select “STRAIGHT”.
AMP
STRAIGHT
SOURCE
ENT.
TV
EFFECT
DIRECT STEREO
Notes
•To avoid unexpected noise, do not play CDs encoded in DTS when the “DIRECT STEREO” mode is selected.
•When
•No sound will be output from the subwoofer.
•“TONE CONTROL” (see page 33) and “SOUND MENU” (see page 77) settings (except for speaker level settings) are not effective.
•The front panel display automatically dims.
y
You can also select the “DIRECT STEREO” mode by rotating the PROGRAM selector on the front panel.
OPERATION | BASIC |
|
|
STRAIGHT
2To deactivate the “STRAIGHT” mode, press STRAIGHT on the remote control again so that “STRAIGHT” disappears from the front panel display.
The sound effect is turned back on.
y
You can also select the “STRAIGHT” mode by pressing STRAIGHT (EFFECT) on the front panel.